Infini-G01 Gigabit media converter can convert Optical－Electric Ethernet signals between 1000M UTP interface (T) and 1000M optical fiber interface（X）. The traditional 1000M Gigabit Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabit IC from USA . 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and diagnose the failure of converters. Infinifiber.com Gigabit media converter could be used individual, or inserted to 14 slots RACK which is suitable for the use of Network Centre.
GS01 single mode Gigabit media converter could be used double optical fiber-module or single optical fiber-module which must be used in couples.Infin-G01-SFP Gigabit media converter provides two ports, one is a 1000M SFP port, the other is a UTP port, the SFP port can be used various 1000M SFP optical fiber-module (1000Base-T, 1000Base-SX, 1000Base-LX) according to the customers’ requirement.
Gigabit fiber media converter Features:
Supports only 1000M and Full Duplex.
The UTP port supports the connection of MDI-MDIX auto crossover.
Multimode Fiber: the max distance up to 224m/ 550m
Singlemode Fiber: the max distance up to 100km
Small power consumption, less heat, small size
Gigabit fiber optic converter Specifications:
Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX
Connector: UTP: RJ45, 1000Mbps; Fiber: SC/LC,1000Mbps
UTP cable: Cat 5e or Cat 6 (the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125μm (the max distance up to 550/224m)
singlemode : 8.3/125, 8.7/125, 9/125μm (the max distance up to 100km)
LED：PWR ，FX Link/Act，TP TX，TP RX，TP 100，TP 1000
Power: AC 110 ～ 240V to DC 5V; DC48V to DC 5V.
Ambient temperature：0 ～ +50℃
Storage temperature：-20 ～ +70℃
Humidity：5% ～ 90%
Dimensions：26 (high) × 70 (width) × 93 (length) mm
Gigabit media converter Order information:
1000M Ethernet Multimode Converter: optical wavelength 850nm, optical fiber max distance up to 224m for 62.5μm , 550m for 50μm
1000M Ethernet Singlemode Fiber Converter: optical wavelength 1310 or 1550nm, optical fiber max distance up to 20, 40, 60, 80 or 100km, xx for the amount of distance.
1000M Ethernet Singlemode Fiber Converter, which must be used in couples. Optical wavelength 1310/1550nm or 1490/1550nm, optical fiber max distance up to 20, 40, 60, 80 or 90km, xx for the amount of distance.
1000M Ethernet SFP Fiber Converter with one RJ45 port and one SFP port, can be used various 1000M SFP module according to the customers’ requirement.